MANUFACTURED/INDUSTRIAL PRODUCTS
Pipe Rehabilitation
Rehabilitation of piping systems is a specialized profession. The ever-growing proliferation of materials, systems, and techniques demands the most of designers, specifiers, installers, and inspectors.
Modern pipeline rehabilitation materials are plastics, first and always. A pipeline rehabilitation project is as much a plastics processing project as a civil engineering project.
For 25 years, Microbac Laboratories Hauser Division has been the premier supplier of materials testing to the pipeline rehabilitation industry. Laboratory professionals have participated in the development of every ASTM Product Specification and Installation Specification for pipeline rehabilitation on Committees F17 and D20. Microbac has conducted thousands of installation qualification tests, design verification tests, and specification-conformance tests on pipeline rehabilitation materials.
Microbac can assist you in specifying the most cost-effective quality control program for your rehabilitation project. Our laboratory professionals will help you understand the differences between products, installation procedures, and performance requirements.
TESTING EXPERTISE
Flexural Properties
Microbac performs flexural properties tests on thermoplastic pipe in accordance with ASTM D790.
Tensile Properties
Microbac performs tensile properties tests on thermoplastic pipe in accordance with ASTM D638.
Chemical Resistance
Microbac performs a variety of chemical resistance procedures, including ASTM D5813, ASTM F1216, ASTM F1743, ASTM F2019, ESCR tests, Green Book coupon tests, and simulated service tests.
Creep Testing
Microbac performs long-term flexural creep properties per ASTM D2990.
RELATED CAPABILITIES
Specific Gravity per ASTM D792 and ASTM D1505
Compression Properties per ASTM D695
Parallel Plate Loading per ASTM D2412
Barcol Hardness per ASTM D2583
Izod Impact Strength per ASTM D256
Punch Shear per ASTM D732
Deflection Temperature Under Load per ASTM D648
Coefficient of Linear Thermal Expansion per ASTM D696
Wastewater Analysis
• NPDES permitting & routine monitoring
• Stormwater monitoring
• Industrial pre-treatment programs
Groundwater Monitoring
• Environmental site assessments
• Landfill compliance monitoring for municipal or residual landfills
• Compliance monitoring for industrial sites
• Biosolids land application testing
Hazardous and Solid Waste Characterization
• Full TCLP for waste disposal
• Residual wastes
• Incinerator ash
Drinking Water Analysis
• The Lead & Copper Rule
• Phase II and Phase V requirements
• The National Primary & Secondary contaminant parameters
• New source parameters
• Required routine monitoring
Site Remediation
• Full service analytical chemistry for investigation or closure
• Complete bioassessment and bioremediation support
|
